How to Create a Fence With Chicken Wire for Climbing Vines

Answer

You may create more space in your garden by installing a fence made of chicken wire, also known as poultry netting, and allowing vines to climb it. Whether you’re using your fence to support a flowering vine or to trellis a vegetable like peas or cucumbers, a chicken wire fence saves growing space on the ground while letting climbing plants follow their natural growth habits. This is beneficial whether you’re using your fence to support a flowering vine or to trellis a vegetable like peas or cucumbers. Expanding your garden to include additional veggies, fruits, and flowers is a straightforward project that only requires the use of basic equipment and a few basic skills.

  1. 1. Don Protective Gear

    Put on some work gloves to keep your hands from being hurt by the sharp edges of the chicken wire and splinters that may fall off the stakes.

  2. 2. Select the Site

    Pick a spot along the boundary where vines are already growing or may be planted within a foot or so of the fence. Clear off a space along the whole length of the fence that is between one and two feet wide. This will give you room to tend to the vines, prune them, or select veggies if necessary.

  3. 3. Measure the Fence

    After you have determined the length of your fence in feet, divide that number by 5. Include one more in the overall tally. Purchase this many stakes or posts to use in constructing your chicken wire fence.

  4. 4. Dig the Holes

    At both ends of the fence line, dig a hole that is eight inches deep. Drive a stake into each hole with a hammer and then push it down to a depth of 12 inches. Replace the earth that was removed from the area surrounding the stake’s base, then press it down firmly with your foot.

  5. 5. Add String and Pound Stakes

    Make a straight line by tying a piece of thread to each stake one inch from the top, beginning at one of the end posts and ending at the other. Drive your additional pegs into the ground at intervals of five feet. Before connecting the chicken wire to the fence posts, unroll it to a length of at least 5 feet and then gently smooth it down. Unroll the whole length of the wire netting that you will be using, cut it free from the roll using wire cutters, and then flatten it. If there is enough room, do this.

  6. 6. Unroll the Chicken Wire

    According to the instructions provided on the Makers Corners website, one should wind chicken wire completely around the first end spike, spanning the whole height of the stake. Attach the chicken wire to the stake with staples, then pull it so that it is tight against the next stake. Staple. Continue in this manner until you have reached the furthest point of the fence.

  7. 7. Wrap and Staple

    Finish up your chicken wire trellis by wrapping chicken wire around the end-stake and stapling it in place.

  8. 8. Finish Your Chicken Wire Trellis

    You can hang chicken wire without using staples if you use metal posts that are pre-notched. After the posts have been installed, use pliers to guide strands of the netting down into the notches. You may secure the chicken wire in a secure position by squeezing the tabs that create the notches and pressing them against the posts.

    Things You Will Need

    • Measuring tape

    • Protective eyewear

    • 6-foot wooden garden stakes or 6-foot pre-notched metal fence posts

    • Shovel

    • Small sledge or large hammer

    • String

    • Staple gun

    • 5-foot chicken wire, the length of your fence

    • Leather-palmed or other heavy work gloves

    • Wire cutters

    • Pliers

    Tip

    According to the information provided on the Seed Savers website, an A-frame chicken wire trellis is one of the easiest types of trellises to construct. This type of trellis is the most suitable for growing climbing vines such as climbing floral vines, certain types of beans, and all varieties of peas.

    Walking on unrolled chicken wire is an effective technique to flatten it and make it easier to work with.

    Some rolls of chicken wire are held together by a longer wire that traverses the whole of the roll from one end to the other. It may be carefully removed using pliers, after which the wire can be rolled up and either saved or thrown away indoors, where it will be safe from becoming stuck in the lawnmower.

    Wear gloves at all times inside the structure to protect your hands from being injured by the sharp wires that are exposed when the chicken wire is cut.

    Warning

    Keep gloves on throughout building to keep from getting cut by the sharp wires exposed when you cut the chicken wire.