How to Maintain Your Push Mower


If the homeowner performs regular and normal maintenance on their push mower, it has the potential to survive for up to 15 years or even longer. Maintenance for a push mower should be performed twice yearly, and each session takes no more than a few hours to do. Homeowners are encouraged to read the owner’s handbook of their push mower before doing any maintenance on the device.

Basic Push Mower Maintenance

According to Lowe’s, the procedure for maintaining a push mower will change depending on the type of the mower, but the majority of the stages will be the same for all push mowers. Mowers are susceptible to damage from material such as tiny pebbles and other particles, therefore it is important to do some modest maintenance on them after each usage. For any push mower, it is essential to check for any loose components and make certain that the wheels move freely and are not damaged in any other way. Additionally, it is essential to check the machine’s oil level and add more as required. After cutting the grass, it is simple to prevent rust by simply brushing off the machine, emptying the grass collector on the push mower, and scraping any debris off of its underbelly. This routine will avoid rust from forming.

When you need to replace components on a push mower, you should only use ones that have been authorised by the manufacturer. This will ensure that the mower continues to function properly over time. Any kind of maintenance work need to be carried out in a room that has enough ventilation and on a drop cloth laid out on a hard, level surface. This very absorbent canvas drop cloth is available in ten different sizes, and it can be washed and reused between different projects in a washing machine.

The manual mower should be turned off, and the wire leading to the spark plug should be unplugged (if it is gas.) When being serviced, the mower is often positioned such that it is on its side. It’s possible that the maker of your push mower will insist that it be used without any gas in it, or they could recommend that you place a piece of plastic beneath the fuel cap to conceal the intake. The person who is responsible for servicing the mower should also ensure that the dipstick is in the down position and the air filter is facing upwards. This will prevent oil from entering the top of the engine.

Winterizing a Push Mower

According to Lawn Doctor, a homeowner can perform maintenance work on a push mower at any time of the year; however, the best times to do it are before and after the season in which it is used most often, which is typically at the beginning of the summer and in the autumn. This is because specific tasks need to be carried out before it goes unused for a number of months. By preparing a push mower for the winter, not only will it be much simpler to operate once spring comes, but there will also be far less damage to both the grass and the mower itself. Because bent or broken blades may cause the grass to have ragged edges, which can eventually kill the grass, it is important to replace or repair any bent or damaged blades towards the end of the season.

According to Consumer Reports, it is essential to empty the gasoline tank before putting the mower away for the winter in order to prevent having to pay a professional to clean the push mower’s carburetor, which may be expensive. It is important to remember to remove the battery from an electric push mower and store it in a location that does not experience extreme temperature changes. When kept at temperatures ranging from 40 to 80 degrees Fahrenheit, the battery of a push mower will have a longer lifespan. Both the correct way to remove the gas from a mower and the temperature range that should be maintained for the battery are detailed in the owner’s handbook. However, different manufacturers have different recommendations for how the gas should be removed.

Replacing a Push Mower Air Filter and Oil

The recommendation from Home Depot is that customers should routinely change the air filter in their push mowers in order to prevent the engine from becoming clogged. Before you get started, you should consult the owner’s handbook to find out what kind of air filters you have and whether or not they need a pre-cleaner for the air filter. Before removing any filters, you must first disconnect the spark plugs from the push mower. Paper filters that seem to be unclean should be replaced, and foam filters should be removed, washed in water that is lukewarm but warm, and then dried in the air. Before you replace the spark plugs and the air filter for the push mower, coat the air filter with two tablespoons of motor oil and then reconnect it.

If you’ve ever wondered how to replace the oil in a push mower, the answer is simple: after every 50 hours of usage or once a year, whichever comes first, remove any oil that is dark or contains debris. Before you can change it, you need to make sure the spark plugs are disconnected, the drain cap is removed, and the oil is drained into a container. After the old oil has been drained, replace it with fresh oil while taking care not to overfill the compartment; the reserve should only be brought up to the level shown on the dipstick.

a pre-cleaner for the air filter (if applicable)

Air filters made of paper or foam

Small engine oil

Sheet of plastic