Moving the Granite From Old to New Cabinets


Granite kitchen countertops are a popular upgrade that many homeowners choose to put in their homes. If, on the other hand, you put your granite initially and now want to modify the cabinets in the kitchen, you could choose to repurpose the granite that you already have. This is something that can be accomplished, but the level of success will depend on the kind of granite used, the design of the kitchen, and how the granite slabs themselves are handled.

Examine the Granite Countertops

There are certain stones that are advertised as granite but are not, in fact, granite. Some of these stones are far more brittle and weaker than others, while others are much stronger. If your granite is very dense and robust, there is a greater possibility that it can be transported. The website for Maryland Granite suggests that you search for thin “cracks” or fissures in the stone. The stone’s overall strength will be proportional to the number of cracks and pits it contains.

Check the stone’s thickness, then look at it from below a kitchen cabinet to get a better perspective. If there is plywood behind it, then it is very certainly a thinner stone that is more prone to shatter. If there is no plywood, then it is most likely a thicker stone that can be removed and reused without breaking. If there is plywood, then it is unlikely that it can be removed.

Removing Thinner Stone

When the stone is at least two millimetres thick (three quarters of an inch), it is anchored to a plywood backer for additional support. It will be necessary to remove this outdated plywood before proceeding with the installation of the stone. If the stone is in individual pieces and there are no seams between them, you should be able to remove it from the kitchen cabinets by unscrewing the plywood and taking it off along with the granite.

In order to avoid fractures, you should support the granite so that it is standing on end. To remove the old plywood, carefully pry it off with a pry bar. Nails may be pushed up through the plywood and into the granite from various spots if the stone has many seams. This will free the granite from the plywood if it is done so carefully and uniformly. After that, the joints may be cut, and the stone can be repositioned.

Removing Thicker Stone

Cutting the sealant that is used to secure a thicker granite onto the kitchen cabinets may be done using a handheld rotary tool if you have one. This sealant is applied all the way around the stone, including the areas where it meets the walls. It is possible for the rotary tool to cut through the granite while it is still attached to the wall or cabinet in the kitchen. In addition to that, it may be used to cut the seams that are present between two pieces of stone.

Lifting the stone requires at least two persons working together, but it may be done with three. In order to avoid the stone from splitting while it is being transported to the new cabinets, it must be supported vertically on end. In the event that it has to be saved, then it need to also be kept on end.

Installing the Granite Countertops

In order to reuse the granite, the new cabinets have to be installed in the exact same place and take up the exact same amount of space as the previous cabinets did. There is no room for modification since the granite would not be able to fit otherwise. Plywood is fixed onto the cabinetry so that it may accommodate thinner stones. After the silicone adhesives have been applied by workers on top of the plywood, the granite is finally set into position.

The same kind of sealant is used to attach the more substantial stones directly to the cabinet boxes themselves. According to the website of Ron Hazelton, the stone is transported in a vertical direction up to the kitchen cabinets, where it is then raised up and placed in its final location with care.