The Care & Cleaning of Slate Tile

Answer

Slate is a kind of metamorphic rock that is constructed of compacted mud. It is brittle, robust, and long-lasting, and it readily breaks into layers that may be turned into tiles. It is possible to polish these tiles, hone them, or leave them in their original, cleft condition. They are versatile enough to be put in every part of the house, including the bathrooms and the mudrooms. You need to give your slate tile the correct care in order for it to retain its beautiful appearance. In order to preserve its natural beauty throughout time, it is important to properly clean, maintain, and seal slate.

Care After Installation

The stone known as slate is naturally fractured and brittle. After the tiles have been installed for a period of three months, it is possible that some of the tiles may flake or break off into little pieces. This is referred to as “spalling,” and it is a natural process that takes place when the slate adjusts to its new surroundings. It’s possible that the area in the house where the slate has been laid may get very dusty, and you could also find that there are little pieces on the floor.

Every day, sweep the slate to help bring the dust and chips to the surface. If your vacuum does not have a beater bar, you may still do regular vacuuming to assist in reducing the amount of dust that accumulates. After the slate has had a chance to settle, the spalling will automatically come to an end.

Cleaning the Tile

Since slate is a natural stone, the surface of the stone may be etched by various acids and alkaline cleansers. This may not be particularly evident on naturally cleft slates, but it may be highly noticeable on slate surfaces that have been sharpened and polished. Regular sweeping of the slate will reduce the amount of surface grit and dust that accumulates.

What is the most effective cleaning that can be used on slate floors? According to Bob Vila, you should clean the slate tiles as necessary using either a stone cleaner or a gentle detergent with a neutral pH. Avoid using any cleansers that include lemon or vinegar since any of these substances might cause etching if used. To avoid water stains on the slate, first rinse it with clean water, then dry it with a soft towel after it has been polished or honed.

Sealing Porous Tile Slates

There are many different kinds of slate tile, some of which are even created using stones that are referred to as quartzites. Some of these slates are porous, which means they will take in moisture; moreover, some of these slates may take in stains. As a result, it is essential to protect your slate on an annual basis in order to prevent it from being stained. Pouring water on the surface of your slate will reveal whether or not it has pores or not.

After ten minutes, if the water still leaves a black patch, this indicates that your slate has to be sealed. Stone that does not experience colour alterations does not need to have its surface sealed. Make use of a sealer that penetrates into the slate and apply it to the surface using a paintbrush made of foam. If desired, topical sealers with color-enhancing properties may be applied to any and all slates. These make the colour of the slate look darker and deeper, closer to the hue it has when it is wet. The use of such sealers is completely discretionary and has no bearing on how the tile should be maintained.

Scratch Removal Tips

In high-traffic locations, slate may develop scratches that seem like chalk over time. This is especially true in certain regions. According to Tile Master Blog, they may be concealed by adding mineral oil to the scratch and the area of tile around it. After using a gentle detergent to clean it, make sure the slate is completely dry before using it again. Apply the mineral oil to the scrape with a soft cloth, massaging it into the surface of the scratch until the scratch is no longer visible. If the slate is made of porous stone, the mineral oil will also serve to seal the stone.