What to Use to Clean Pebble Rock Flooring

Answer

When cleaning pebble rock flooring, you should avoid using acidic chemicals such as vinegar, ammonia, or lemon juice. This is because pebble rock flooring is made up of a variety of different stones, and some kinds of rocks may be etched by acids. Instead, you should choose cleaning products that have a pH that is neutral to maintain the greatest appearance possible for your floor. If you are unsure about what to do, it is best to get the recommendations of the firm who installed the flooring.

Mild Detergents

When cleaning an exposed pebble flooring that is composed of a number of different tiny stones, use mild detergents that have an alkaline base. If the pebbles in the flooring are made of travertine, limestone, marble, or even granite, then damaging substances like household bleach and ammonia might erode or etch the surface of some of the stones in the flooring. Because it is best to err on the side of caution, you should be able to get the job done with approximately a quarter of a cup of vegetable-based detergent combined with one gallon of warm water and a mop or brush with soft bristles.

Steam Cleaning

After wetting the floor, you should clean it using a pH-neutral or mildly alkaline detergent that has been combined with water. When used for thorough cleaning, a portable steam cleaner helps to break off old filth and debris. The previous dirt may be removed from the pebble flooring by holding the steam cleaner anywhere from three to six inches above it and then rinsing it with clean water before allowing the floor to dry. This works particularly effectively in areas of the shower or bathroom where there is a buildup of soap scum.

Stone Cleaners

Although some vendors suggest cleaning pebble stones using hydrochloric acid, you should never use acid solutions unless you are very certain that the pebbles in the flooring can withstand the strong chemical. After soaking the flooring with clean water, choose from a selection of neutral pH-balanced proprietary cleansers from the available options. The floor should be let to sit with the cleaner on it for three to five minutes. After waiting the allotted amount of time, proceed to clean the floor by scrubbing it with a soft-bristled brush, string mop, or sponge mop while the cleaner is still on the floor. It should be washed with water that is transparent.

Pebble and Epoxy Floors

There are several different approaches to cleaning pebbles that have been implanted in epoxy. When epoxy pebble flooring is laid outside, it must be washed down and cleaned with a power washer and a light detergent after installation. When cleaning the flooring inside your home, use a gallon pail of hot water that has been blended with a gentle detergent. Rinse the area with clean water to get rid of any soap residue, then allow it to air dry.

Protective Seal Coat

If you have pebble flooring that is visible and set in grout, you should seal the flooring and the grout at least once a year to assist the pebbles resist stains and discolouration. The majority of the stones used in such flooring are porous, which makes it easy for stains to penetrate them. Any spills that have the potential to discolour the pebble flooring should be wiped up as soon as possible. Some types of pebble flooring may have stains removed using a poultice made of a clay-based product or a paste made of baking soda.